Doorway / InSite Code

Label

Description

Units

Default Value

Range

C1

ALMF

Alarm Filter; used to set filter to accept alarms from specific types of Modules:
0: Accept All Alarms
1: Alarms from Networked T+Rh sensors only
2: Alarms from Monitoring Modules only
3: Alarms from Cool Sources (and their Submodules) only
4: Alarms from Heat Sources (and their Submodules) only
-excluding Boiler Controller with Housekeeping
5: Alarms from Boiler Controller with Housekeeping (and its Submodules) only
6: Alarms from Networked Outside Sensors only
7: Alarms from Serial Adaptors only
8: Alarms from AHU Controllers (and their Submodules) only
9: Alarms from Zone, Slave Zone, DHW and FCU Controllers (and their Submodules) only

-

-

0 to 9

C2

ALRM

Alarm Mode for local alarm input ONLY.
0=ignore alarms
1= report alarms

-

0

0 to 1

C3

ALST

Alarm status of Local Alarm Input i.e. 1=Shorted

-

1

0 to 1

C4

ALDF

Alarm defeats filter. Set 1 allows local input alarms to bypass alarm filter and be placed in the alarm list.

-

0

0 to 1

Doorway / InSite Code

Label

Description

Units

Default Value

Range

I1 (C30)

IN A

Local Alarm Input status

-

-

0 to 1

I6 (C35)

ALMS

Alarm Received Relay status (1=on)

-

-

0 to 1

I7 (C36)

ALCR

Alarm Current Relay status (1=on)

-

-

0 to 1

W7 (C44)

SERV

Generate Service Pin message

-

0

0 to 1

W8 (C45)

CGST

Configuration Mode status

-

0

0 to 1

C50

Alarm 1 source

Shows the source Module that sent stored alarm no.1
Alarm Module stores 15 alarms; no. 1 is the oldest and will be overwritten when a new alarm appears. 4 character label will be updated automatically to show source, value displayed indicates address of the source:
Label {value } Source Device
TRH {n }: = Networked T+Rh Sensor, address n
MON {n }: = Monitoring Module, address n
HSC {n }: = Heat Source, address n
CSC {n }: = Cool Source, address n
SEN {n }: = Networked Outside Sensor, address n
ZON{n }: = Zone, Slave Zone, DHW or FCU Controller, address n
AHU {n }: = AHU Controller, address n
BLR {n }: = Boiler Controller (with Housekeeping), address n
SLT {n }: = Serial Adaptor, address n
DEV {0 }: = Unknown Device, address unknown

-

-

0 to 9999

C51

Alarm 1 type

Shows the type of alarm (its name and condition) stored as alarm no.1:
Alarm Module stores 15 alarms; no. 1 is the oldest and will be overwritten when a new alarm appears. 4 character label will be updated automatically and alternates between showing alarm name and alarm condition, value displayed indicates value of temperature etc. as the alarm occurred, if appropriate, or zero if not applicable :
Label : Alarm Condition
ALRM = Digital Alarms and any alarm where condition is not needed (e.g Filter Fail alarm from AHU)
HIGH = High Alarms from a sensor
LOW = Low Alarms from a sensor
BUST = Sensor Failed Alarm
EOFW = Special Diagnostic Alarm, SeaChange use only

-

-

0 to 9999

C52

Alarm 2 source

Source of stored alarm no. 2 (see C50)

-

-

0 to 9999

C53

Alarm 2 type

Type of stored alarm no. 2 (see C51)

-

-

0 to 9999

C54

Alarm 3 source

Source of stored alarm no. 3 (see C50)

-

-

0 to 9999

C55

Alarm 3 type

Type of stored alarm no. 3 (see C51)

-

-

0 to 9999

C56

Alarm 4 source

Source of stored alarm no. 4 (see C50)

-

-

0 to 9999

C57

Alarm 4 type

Type of stored alarm no. 4 (see C51)

-

-

0 to 9999

C58

Alarm 5 source

Source of stored alarm no. 5 (see C50)

-

-

0 to 9999

C59

Alarm 5 type

Type of stored alarm no. 5 (see C51)

-

-

0 to 9999

C60

Alarm 6 source

Source of stored alarm no. 6 (see C50)

-

-

0 to 9999

C61

Alarm 6 type

Type of stored alarm no. 6 (see C51)

-

-

0 to 9999

C62

Alarm 7 source

Source of stored alarm no. 7 (see C50)

-

-

0 to 9999

C63

Alarm 7 type

Type of stored alarm no. 7 (see C51)

-

-

0 to 9999

C64

Alarm 8 source

Source of stored alarm no. 8 (see C50)

-

-

0 to 9999

C65

Alarm 8 type

Type of stored alarm no. 8 (see C51)

-

-

0 to 9999

C66

Alarm 9 source

Source of stored alarm no. 9 (see C50)

-

-

0 to 9999

C67

Alarm 9 type

Type of stored alarm no. 9 (see C51)

-

-

0 to 9999

C68

Alarm 10 source

Source of stored alarm no. 10 (see C50)

-

-

0 to 9999

C69

Alarm 10 type

Type of stored alarm no. 10 (see C51)

-

-

0 to 9999

C70

Alarm 11 source

Source of stored alarm no. 11 (see C50)

-

-

0 to 9999

C71

Alarm 11 type

Type of stored alarm no. 11 (see C51)

-

-

0 to 9999

C72

Alarm 12 source

Source of stored alarm no. 12 (see C50)

-

-

0 to 9999

C73

Alarm 12 type

Type of stored alarm no. 12 (see C51)

-

-

0 to 9999

C74

Alarm 13 source

Source of stored alarm no. 13 (see C50)

-

-

0 to 9999

C75

Alarm 13 type

Type of stored alarm no. 13 (see C51)

-

-

0 to 9999

C76

Alarm 14 source

Source of stored alarm no. 14 (see C50)

-

-

0 to 9999

C77

Alarm 14 type

Type of stored alarm no. 14 (see C51)

-

-

0 to 9999

C78

Alarm 15 source

Source of stored alarm no. 15 (see C50)

-

-

0 to 9999

C79

Alarm 15 type

Type of stored alarm no. 15 (see C51)

-

-

0 to 9999

Engineering Parameters; only accessible via Doorway and InSite

C90

NOAL

No Alarms from the Local Input when set to 1
(but module may still have current alarms from other modules on the network as indicated by the Alarm Received/Alarm Current outputs)

-

-

0 to 1

C91

GENA

Local Input in alarm (when set to 1)

-

-

0 to 1